Flying Geese is the next unit in the Beginners Unite! series.
Flying Geese units are heavily used in quilt patterns and it's worth getting them trimmed and perfect. Just like half square triangle units (HST) there are different ways and rulers to use when making Flying Geese. In this post I will show you how to make them the old fashioned original way and how to make them using the No Waste method. I will also show how to trim them if you make them over sized, using a Wing Clipper® from Deb Tucker 180 Design Studio (no affiliation) and just a square from Creative Grids.
No Waste Flying Geese
The measurements I'm using in this tutorial are for over sized FG units. but the instructions for piecing are the same even if you make them to be exact.
For this tutorial you need:
1 - 5 1/2" square
4 - 3" squares
On the wrong side of the 3" squares draw a diagonal line.
Place two of the 3" squares on the 5 1/2" square, right sides together, as shown.
Stitch 1/4" on either side of the line.
Cut apart on the drawn line.
Press towards triangles.
Place a 3" square on each of the units made.
Stitch 1/4" on either side of line.
Cut on the drawn line.
Press towards triangles. This method will give you four Flying Geese units.
Trimming with a Wing Clipper® ruler
The lines on the Wing Clipper® make it really easy to know where to trim.
We are trimming these to 2 1/2" x 4 1/2". Find the little diagonals for the 2 1/2" mark and line it up with the point. Trim.
Rotate the FG unit and line up the lines again on the point. Trim
Trimming with a square
I like to make a mark on the half way point on the ruler. Use a sharpie and put a piece of scotch tape or packing tape over it if you have a lot to trim, because it will wear off.
Line the half way mark (in this case 2 1/4") with the point, making sure to give yourself 1/4" seam allowance as well. Trim.
Rotate FG unit and line up the cut edge on the 4 1/2" line. Trim.
Original Flying Geese Unit
For this unit we need:
1 - 2 1/2" 4 1/2" rectangle
2 - 2 1/2" squares
Draw a diagonal line on the wrong side of the 2 1/2" squares.
Place one square right sides together on the rectangle. Note direction of drawn line.
Stitch. I like to stitch just a tish off the line, towards the outside corner.
Press and trim.
Place the other square on the rectangle, noting direction of drawn line.
Stitch.
Press and trim. This will give you one Flying Geese unit.
All 3 Flying Geese units, and you can't tell which one is which, so do the one you enjoy doing. Quilting is about joy and beauty.
Happy Stitching!
Jen
1) Intro - May 2
2) Quilting supplies ~ What makes the process easier - May 9
2a) Side Trip ~ Maintenance - May 11
3) Choosing fabric and color - May 16
2a) Side Trip ~ Maintenance - May 11
3) Choosing fabric and color - May 16
5) That crazy scant 1/4 inch seam allowance - May 30
8) Flying Geese - You are here
11) Is there a trick to keeping those points? - July 13
12) Adding Borders - July 18
13) Sandwich that top - July 25
No comments:
Post a Comment
I love to get your comments and hear your ideas. I always respond to comments (though it may take me a few days), if you haven't heard from me it might mean you are a no reply commenter. If you haven't heard back from me, check back here, because I will reply to the comment.